Replace HYDAC Cartridge Filter

Product Details:

Usage Air Filter, Oil Filter, Steam Filter

In the hydraulic system, replacement HYDAC oil filter element used to filter out solid particles in the working medium and the colloidal material, effective control of pollution caused by the working medium.

Specifications
Replacement HYDAC filter 0240R series
Out diameter 73.5mm
Height 203mm
O-Ring NBR
Media Fiberglass

Replacement of HYDAC Hydraulic Oil Filter Main Features:

Filtration accuracy: 1 ~ 100μm

Working temperature: -30 ℃ – + 110 ℃

Nominal pressure: 21bar-210bar

Applications: petroleum, chemical, aerospace, electronics, electric power, metallurgy,

Sealing material: NBR: petroleum-based, oil-in-water emulsion, water glycol, hydraulic oil, lubricating rubber, Special synthetic fluids

Modular design,Minimum pressure loss,compact structure,High efficient ,Mic or Sm-x filter elements, in accordance with ISO16889 assess large dirt holding capacity of ß value, high pressure differential to ensure optimum life of the filter cartridges,100% · bubble test

Filtration: 5 to 100 microns, β value in line with ISO16889 standards

Our Hydraulic Oil Filter Characters:

We use the most advanced anti-corrosion effective microfiber agglomerate material as the filter body.The filter system is a combination of pre-filtration layer filter bed, microfiber layer, support layer, a filter layer and gravity sedimentation layer which can make solid particles above 3μm in the air can all be filtered out by compressor. The tiny oil dissolved gas about 0.01-1μm through the filter body is condensed into larger oil droplets accumulate in the bottom of the filter and then through the bottom of the filter recess back to the return line siphon compressor lubrication system to be excluded then get more pure, oil-free compressed air.

Outstanding chemical compatibility for filtering acid, alkali and organic solvents

Membrane is folded depth filtration, membrane filtration area big

Low pressure, high dirt holding capacity and long service life

Wide filtering accuracy are selectable

Our Replacement of HYDAC Hydraulic Oil Filter Technology:

(1). Filter material are composed of great fibers and resin through the unique process. fixed void structure make the filter material non-shedding. Intercepted pollution particles will not produce “discharge” phenomenon because of pressure and flow rate pulsating .

(2) Use outside to the inside, along the flow direction gradually reduced gradient pore structure. Layered intercept contaminant particles of different sizes. Achieve deep contaminant. Thus greatly improving the service life.

(3) Use spiral wound reinforcing support to ensure filter stability.

Serious consequences of using poor quality hydraulic oil filters:

Poor quality filter use poor quality filter material which make the filter effect is very poor, resulting in poor medium cleanliness level, the damage is to protect the life of components, severe cases may result in damage to the core components of the system.
vInferior filter end caps and other pressure on the skeleton of the original material cut corners, filter life is shortened, increasing the user’s cost;
Poor quality filters own bad processing technique meanwhile make the products unsightly, reduce filter life, damage oil filter easy then can’t make the oil filter reach good filtering effect.

Our hydraulic oil filter own strict quality tested process to guarantee our product quality,so just rest assured about it.

0 comments on “Replace HYDAC Cartridge FilterAdd yours →

Leave a Reply

Your email address will not be published. Required fields are marked *