Dwyer DM-003 DigiMag Differential Pressure Transmitter Range: 0-0.5 Inch WC From Tatarpur Hapur Ghaziabad India

Dwyer DM-003 DigiMag Differential Pressure Transmitter Range: 0-0.5 Inch WC From Tatarpur Hapur Ghaziabad India
Senses The Pressure of Air and Compatible Gases, This Differential Pressure Transmitter Features a Pressure Range of 0.5 inWC and Has a 4 to 20 mA output. Fast and Easy to Set up, This Transmitter is Suitable for Fan Control, Static Pressures in ducts or buildings, room Pressurization Monitoring, and Differential Pressure Across Filters.
Dwyer DM-003 Offers

Specifically Designed to Mount in a standard Magnehelic® Gauge cutout, this pressure transmitter features a polycarbonate molded housing with integral pressure connections, reducing installation time. In addition, the digital push-button zero and span simplify calibration over typical turn-potentiometers, and a single push-button allows field selection of multiple engineering units.

Features

  • Reduced installation time through zero and span controls that provides quick and easy calibration
  • Fast and easy setup and calibration with push-button zero and span controls
  • Immediate corrective action can be taken by local alerts via the easy-to-read LCD display
  • Reduces upgrade installation costs and simplifies field upgrade from a Magnehelic® Gauge, as both use the same diameter cutout

Applications

  • Differential Pressure Across Filters
  • Fan Control
  • Static Pressures in Ducts or Buildings
  • Room Pressurization Monitoring

Dwyer DM-003 Specifications

ServiceAir And Non-Combustible, Compatible Gases
Pressure Range0.5 inWC
Accuracy±1% FSO
Stability<±1%/year FSO
LimitsPressure: 3.6 psi maximum operation, 6 psi burst
Temperature: -4 to 158°F (-20 to 70°C)
Thermal Effect0.02% FS/°F (0.036% FS/°C)
Output Signal4 to 20 mA (2-wire)
Zero and Span AdjustmentsPush-button
Loop Resistance0 to 1250 Ω maximum
Current Consumption21 mA maximum
ConnectionsElectrical: Screw-type terminals
Process: Male ports on side for”, 3⁄16″, ¼”, 0.2″ (5 mm), 0.23″ (6 mm) ID flexible tubing
Power Requirements10 to 35 V DC (2-wire)
Enclosure RatingNEMA 4X (IP66)
Mounting OrientationNot sensitive to position
Agency ApprovalsCE
Housing MaterialPolycarbonate
DimensionsØ5 x 1.9″ (Ø127 x 48.2 mm)
Weight7.04 oz (200 g)

Click Here For Complete Specifications On The Dwyer DM-003
What’s Included With The Dwyer DM-003

  • Dwyer DM-003 DigiMag Differential Pressure Transmitter,0.5 Inch WC

0 comments on “Dwyer DM-003 DigiMag Differential Pressure Transmitter Range: 0-0.5 Inch WC From Tatarpur Hapur Ghaziabad IndiaAdd yours →

Leave a Reply

Your email address will not be published. Required fields are marked *